Table of Contents
Advertisement
Remote Control
In This Chapter
This section provides a detailed explanation on using remote control functions with your card.
DashBoard Control System Software
The DashBoard Control System enables you to monitor and control openGear
cards from a computer. The DashBoard software and manual can be downloaded from the Cobalt
Digital Inc. website (www.cobaltdigital.com).
Using the Menus and Menu Descriptions
You must first install the DashBoard Control System software on your computer. Refer to the
DashBoard User Manual for software installation procedures and for using the DashBoard interface.
The following pages list the parameters from the menu tabs available in the DashBoard software when
connected to a 9034-SD.
Menu
Card Info
(Read-only)
9034-SD Owner's Manual • • • • (V 2.0)
Item
Format
Product
CDI-9034-SD
Cobalt Digital Inc.
Manufacturer
Software Release
###
Number
Software Build
###
Date
Software Build
###
Time
+12 V Power Rail
#.## W
-7.5 Power Rail
#.## W
Video Input
############
Standard
Reference Standard
############
SSN
############
TM
frames and controller
Description
The product name
The manufacturer of the
product
The release number of the
firmware in this card
The internal build number
of this software
The date and time the
software was created
Positive Supply Power
Negative Supply Power
Detected Video Standard
on SDI or Analog Input
Detected standard of
selected reference.
Displays the Silicon Serial
Number of the card.
Page 19 of 28
Advertisement
Table of Contents
