Gerber ODYSSEY XP Owner's Manual page 55

Reloading factory defaults for the current material
Use the following procedure to restore the default settings for the
currently selected material only.
To reload factory defaults for the current material
1 On the Main menu, press F3 for the Settings menu.
2 On the Settings menu, press F3, Material. The Select Material Type
screen appears.
3 If the currently selected material is not displayed, press F3 or F4 to
scroll through the list of materials until you come to the one that is
currently selected. Press Enter when the current material is displayed.
The Settings Menu displays with the currently selected material.
4 Press F1, Default to restore the default settings for the selected
material. The confirmation screen appears.
F1
5 The Confirmation screen flashes briefly.
SETTINGS MENU
(Default) Material
Corners
*3M Scotchcal 220*
SELECT MATERIAL TYPE
*3M Scotchcal 220*
ENTER Key to Accept
SETTINGS MENU
(Default) Material
Corners
*3M Scotchcal 220*
NOTICE:
Current Material
settings are now
defaulted.
F3
Force
F3
+
-
F4
Force
49