Gerber ODYSSEY XP Owner's Manual page 53

7 Choose the material you want to pounce.
8 Increase the tool force to 10 ounces, which is 62.50 percent.
9 Click the Cut/Pounce icon to send the job to the plotter.
To select pounce from the ODYSSEY XP control panel
1 Attach the pounce cutting strip.
2 Load the material.
3 Insert the pounce tool.
4 Press F3 while holding down the ENTER key for the Operational
Setup menu.
5 Press F4, Misc.
OPERATIONAL SETUP
Settings
ENTER for Main Menu
6 Press F3, Pounce.
Repeats
Pulldown
ENTER for Main Menu
7 Press F3 or F4 to step through the available pounce patterns:
Medium , Long , and Off
SELECT POUNCE TYPE
Pouncing:
OFF
ENTER Key to Accept
Setting
Short
Medium
Long
8 Press ENTER to record the setting and return to Misc Settings menu.
9 Press ENTER to return to the Main Menu.
10 Set the tool force to 10 ounces.
11 Send your pounce job to the plotter.
System
Misc.
MISC SETTINGS
Pounce
Default
.
+
-
Distance between centers
0.050" (1.3 mm)
0.200" (5.1 mm)
0.500" (13 mm)
47
F4
F3
Short ,
F3
F4