Gerber ODYSSEY XP Owner's Manual page 27

If one job is loaded
If several jobs are
loaded
If a job is running
If you start to change a
setting when a job is
running or in the
buffer, and have not
yet accepted the
changes by pressing
ENTER
Slew Key
Left
Right
Up
Down
Use the slew keys to move the carriage and material.
Slew speed starts slowly and increases as you continue to
hold down the key.
Quickly pressing and releasing a slew key produces
movements in increments of 0.001 inch.
To move the carriage and material at the same time, slew
diagonally.
Simultaneously press the two slew keys next to the arrow
that points in the direction you want to move.
CANCEL key clears the job from
plotter memory.
CANCEL clears one job at a time,
starting with the first one received.
CANCEL stops all plotter motion,
ends the job, and clears it from
plotter memory.
CANCEL discards the changes and
returns the previous menu.
To end a job, you must press
CANCEL again.
Movement
Carriage to the left
Carriage to the right
Material backward (toward the
back and out of the plotter)
Material forward (toward the
front and through the plotter)
21