Hyper-Threading Notes - EUROCOM 5600D Monte Carlo User Manual

Table of Contents

Troubleshooting

Hyper-Threading Notes

You can enable (the default setting is disabled) Hyper-Threading from the Advanced Menu in the BIOS

(see

"" on page 5 -

10). Hyper-Threading is only supported in Model C computers with 3.06GHz pro-

cessors. If you do not have this Processor the menu option will not appear.

Hyper-Threading is only supported in Windows XP, so DO NOT enable this option if you are using

Windows 2000/ME/98SE.

If you have updated the Flash ROM BIOS from a previous version, which did not have the Enable Hyper-

Threading option, you must reinstall Windows XP after the BIOS update.

Once you have enabled Hyper-Threading, DO NOT disable the option or the computer may not startup

(returning to the BIOS and enabling the option will correct this in case of accidental disabling of the op-

tion).

If you are changing the processor from a CPU which supports Hyper-Threading, to one which does not,

you will need to reinstall your OS.

Hyper-Threading Notes 7 - 23

Table of Contents

Table of Contents

Do you have a question about the 5600D Monte Carlo and is the answer not in the manual?

5600ds monte carlo