Windows 98 Second Edition; Chipset (Win98Se); Chipset - EUROCOM 5600D Monte Carlo User Manual

Windows 98 Second Edition

This section covers driver and utility installation in-
structions for Windows 98 Second Edition.
What To Have Ready
In some cases when drivers are to be installed
you will need to have present your OS CD -
Windows 98 Second Edition.
If prompted you may swap your Device Drivers
& Utilities + User's Manual CD-ROM with your
OS CD-ROM and back again when required.

Chipset (Win98SE)

1. Click Start (menu) > Run ...
2. Navigate (Browse..) to
D:\Drivers\CHIPSET\Setup.exe and click
OK.
3. To continue press Next > Yes > Next.
4. Click Finish to restart the computer .
5. Windows will then tell you "New Hardware
Found" and begin to install the drivers for you.
6. Click Next and select "Search for the best
driver for your device. (Recommended)."
7. Click Next again.
8. Make sure you have not selected any locations
to search, then click Next > Next > Finish.
9. Click Yes to restart the computer when
prompted.
Windows 98 Second Edition 4 - 5
Drivers & Utilities
4