Lan (Win98Se); Audio (Win98Se); Lan; Audio - EUROCOM 5600D Monte Carlo User Manual

Drivers & Utilities

LAN (Win98SE)

1. Click Start (menu), point to Settings and click
Control Panel. Double-click System (icon)
and then click Device Manager (tab).
2. Click "+" next to Other devices (if its sub-
4 items are not shown).
3. Double-click PCI Ethernet Controller and
click Reinstall Driver (button).
4. When the Update Device Driver Wizard
appears, click Next > Next (make sure that you
have selected "Search for a better driver than
the one your device is using now.
(Recommended)").
5. Select ONLY "Specify a location" (make sure
the other boxes do not have a tick inside them)
and navigate (Browse...) to
D:\Drivers\LAN\win98se.
6. Click OK > Next > Next.
7. When you are prompted 'Please insert the disk
labeled "Windows 98 Second Edition CD-
ROM" and then click OK' eject the CD-ROM
in your drive and insert the Windows CD.
8. Give the computer a few seconds to recognize
that the disk is in the drive, then click OK.
4 - 6 Windows 98 Second Edition
9. Click Finish > Yes to restart the computer when
prompted.
10.The network adapter is now ready for
configuration.

Audio (Win98SE)

1. Click Start (menu) > Run ...
2. Navigate (Browse..) to
D:\Drivers\AUDIO\Setup.exe and click OK.
3. To continue click Next.
4. Click Finish to restart the computer .
5. Windows will then tell you "New Hardware
Found" and begin to install the drivers for you.
6. When you are prompted 'Please insert the disk
labeled "Windows 98 Second Edition CD-
ROM" and then click OK' eject the CD-ROM
in your drive and insert the Windows CD.
7. Give the computer a few seconds to recognize
that the disk is in the drive, then click OK (click
Yes if asked if you want to continue at any
time).
8. You will see the Volume Control appear in the
taskbar alongside the date after you restart the
computer.