Intel Speedstep (Win98Se); Wireless Lan (Win98Se); Usb 2.0 (Win98Se); Intel Speedstep - EUROCOM 5600D Monte Carlo User Manual

Intel SpeedStep (Win98SE)

*Intel SpeedStep Note: This applet helps your
system take advantage of a SpeedStep-enhanced
CPU's capabilities, such as that as found in your
notebook if you have the mobile CPU option.
If you do not have the mobile CPU option there is
no need to install the driver (see
page 3 - 15).
1. Click Start (menu) > Run ...
2. Navigate (Browse..) to
D:\Drivers\SpeedStep\(Your
language)\Disk1\Setup.exe and click OK.
3. Click Next > Yes.
4. Click Finish to restart the computer when
prompted.
5. Click Start (menu), point to Settings and click
Control Panel. Double-click the Power
Management (icon) and then choose your
settings on Intel SpeedStep technology (tab).

Wireless LAN (Win98SE)

1. Click Start (menu) > Run ...
2. Navigate (Browse..) to
3. Click Next > Next > Yes.
4. Click Finish to restart the computer when
"Mobile CPU" on
5. After restart Windows will install the drivers for
6. Click Yes to restart the computer again.

USB 2.0 (Win98SE)

The USB 2.0 driver is only required for Model C
(see
1. Click Start (menu) > Run ...
2. Navigate (Browse...) to
3. Click Next > Next.
4. Click Finish to restart the computer when
D:\Drivers\WLAN\GW-LANSetup.exe and
click OK.
prompted.
you.
"USB Port Type" on page 1 -
D:\Drivers\USB20\Setup.exe and click OK.
prompted.
Windows 98 Second Edition 4 - 9
Drivers & Utilities
6).
4