The Pc Card Problem In Windows 98 - EUROCOM 5600D Monte Carlo User Manual

Table of Contents

Troubleshooting

The PC Card Problem in Windows 98

After installation of Windows 98 or Windows 98 Second Edition, you may find that the PC cards are not

working normally and you may also notice one or more of the following:

• An exclamation mark appears in the PC card driver in Device Manager

• PC cards don't work at all

• PC card controllers are not enumerated

• PC card controllers are disabled on power-up

• PC card controllers are disabled when you resume the computer from Suspend mode

This is a problem caused by Microsoft Windows 98 (Second Edition). To resolve the problem, immediately

after installing Windows 98SE install the program file PCI.vxd to update your system driver. The PCI.vxd

driver is supplied by your computer service representative.

For more information on this, refer to the Microsoft article "CardBus Device Not Enumerated with TI

14xx or 44xx CardBus Controllers" (Article ID Q233017) which can be found on Microsoft's web site.

7 - 16 PC Card

Table of Contents

Table of Contents

Do you have a question about the 5600D Monte Carlo and is the answer not in the manual?

5600ds monte carlo