Table of Contents
Advertisement
Attaching a Serial Mouse
The serial port features a 9-pin connector. You can connect any serial device
such as a mouse to this port.
To connect a serial mouse, follow these steps:
1.
Turn the system power off.
2.
Connect the cable to the serial port on the rear panel of the DeskNote
Computer.
3.
Tighten the screws to fasten the cable to the serial port.
4.
Turn on the DeskNote Computer.
In addition, you may need to install the manufacturer-supplied driver for the
serial mouse. Refer to the device's user's guide for more information.
Figure 2-25
Chapter 3—BIOS Utilities 2-31
Advertisement
Table of Contents
Need help?
Do you have a question about the DeskNote 2100P and is the answer not in the manual?
Questions and answers