Table of Contents
Advertisement
Replacing the Floppy Disk Drive
1.
Turn off the power.
2.
Turn the DeskNote over.
3.
Locate the Floppy Disk Drive latch (Figure 2-14).
4.
Push the latch in the direction as indicated and pull the floppy disk drive
module out of its bay.
5.
Insert the replacement module into the bay.
6.
Make sure it slides into the bay properly and mates firmly with the
connector.
Figure 2-14
Chapter 3—BIOS Utilities 2-15
Advertisement
Table of Contents
Need help?
Do you have a question about the DeskNote 2100P and is the answer not in the manual?
Questions and answers