Attaching A Serial Mouse - EUROCOM 5100-C DeskNote Lite User Manual

Attaching a Serial Mouse

The serial port features a 9-pin connector. You can connect any serial
device such as a mouse to this port.
1.
Turn the system power off.
2.
Connect the cable to the serial port on the rear of the computer.
3.
Tighten the screws that fasten the cable to the serial port (Figure 2-
26).
4.
Turn on the computer.
In addition, you may need to install the manufacturer-supplied driver for the
serial mouse. Refer to the device's user's guide for more information.
User's Manual
2-28
Figure 2-26