Chapter 3 : Bios Utilities; Power On Self Test (Post); Post Message: Normal Operation - EUROCOM DeskNote 2100P User Manual

Table of Contents

BIOS Utilities

This chapter provides information regarding the Power On Self-Test (POST)

and shows you how to use the System Configuration Utility (SCU) to configure

the system parameters. The settings made in BIOS SCU will affect the

performance of the DeskNote.

System Configuration Utility (SCU)

Power On Self Test (POST)

The system BIOS (Basic Input/Output System) performs a series of Power On

Self Test (POST) on system memory and key computer components when the

computer is turned on every time. If an error exists, the POST routine may halt

execution (depending on the seriousness of the problem). The POST also

initializes BIOS configuration then boots the operating system.

You will see the following message if no error exists after the POST is

performed

Note: You may press the Spacebar key to skip the memory test.

SystemSoft BIOS MobilePRO BIOS Version 1.01 (2482-00)-(R1.00.tr02)

300 MHz Celeron with MMX CPU

L2 Cache: 128KB Installed

4 MB Video RAM

2-38 User's Manual

Table of Contents

Need help?

Do you have a question about the DeskNote 2100P and is the answer not in the manual?

Desknote 2100c