Epson Stylus COLOR 760 Service Manual page 95

EPSON Stylus COLOR 760
n
During disassembly and assembly of the hopper assembly,
do not let the grease on the cam parts touch other parts.
Wipe off any grease smeared on other parts.
n
Be careful of the direction of the Hopper Release Lever
when installing it. Refer to Figure 4-29.
n
When installing the right and left Paper Feed Roller
Assemblies to the LD Roller Shaft, the black Paper Feed
Roller Assembly should be set on the right side.
n
Make sure that gutters of back side of both Paper Feed
Roller Assembly are set on the rail on the ASF Frame.
Refer to Figure 4-30.
n
Make sure that the Left frame of the Paper Feed Assembly
is in the gutter of the Paper Guide.
Refer to Figure 4-31.
Figure 4-29. Assembling the LD Hopper Release Lever
Disassembly and Assembly
Hopper Release Lever
Disassembly Procedures
Rail on the ASF & gutter portion of
Paper Feed Roller Assy.
Figure 4-30. Setting the Paper Feed Roller Assembly on the Rail
Paper Guide
Gutter portion
Left Paper Feed Assembly
Figure 4-31. Setting the Left Paper Feed Assembly
Revision C
Paper Feed Roller Assembly
95