EPSON Stylus COLOR 760
5.2.3.12 Recovery for the clogged nozzle
This function repeats printing the Nozzle check pattern and to perform
the head cleaning. Your can check the recovered nozzle condition after
perform the head cleaning.
NOTE: In this sequence, CL1' cleaning mode & rubbing operation
are always performed.
1. Select the "Recovery for clogged nozzle" menu. The following menu
appears.
Figure 5-49. Select the Recovery for clogged nozzle
2. After setting a plain paper, click the "OK" button. The printer enters a
head cleaning sequence and prints the nozzle check pattern as
shown in the following figure.
Adjustment
Figure 5-50. Nozzle Check pattern
3. After completing one sequence, the program displays the counter
that this program is performed as following figure.
Figure 5-51. Display the counter for this program
4. Depends on the nozzle recovery condition, repeat this operation.
Adjustment
Revision C
137