Epson Stylus COLOR 760 Service Manual page 114

EPSON Stylus COLOR 760
[Fixing Parallelism Adjustment Bushing]
13. Fix the right and left Parallelism adjustment bushings with screws.
(No.7 screw for each.)
When completing this adjustment, check the overlap amount of the
printhead and head cleaner.
1. After release the Pump Planetary Lever Fixing Guide, rotate the
Combination Gear 13.5, 30 to front side and set the head cleaner.
Combination gear 13.5,
30
Figure 5-3. Setting the Head Cleaner
2. Move the carriage next to the head cleaner and make sure that
overlap between the tip of the printhead and cleaner head is more
than 0.5 mm.
Adjustment
Figure 5-4. Overlap of Head Surface and the Cleaner Blade
3. Then, rotate the Combination Gear 13.5, 30 and return the head
cleaner under the Paper Eject Frame while releasing the Pump
Planetary Lever Fixing Guide.
Pump Planetary Lever
Fixing Guide
Adjustment
Revision C
114