Epson Stylus COLOR 760 Service Manual page 122

EPSON Stylus COLOR 760
5. If you can read out the present Head voltage ID, take memo the
read out Head ID voltage.
NOTE: In this Adjustment program, you can not write the read out
Head ID to the new Main board in the read out Head ID
menu. In case you write the read out Head ID to the new
main board, you have to take menu the read out Head ID
and input it again in the "Change data menu."
6. Select the "Change data" item in the Head ID input menu and click
the OK button. Following Head ID input menu is displayed.
Figure 5-14. Entering the 12 digits Head ID
7. Input the12digits code of the Head Voltage ID in the above menu.
In case you input an incorrect character or symbol in this menu,
this program detects it automatically and displays error message in
the bottom column. Figure 5-17 shows you the one of the error
message.
Adjustment
Figure 5-15. Error message in the Head ID entering menu
8. When the Head ID is input and write to the EEPEOM, following
message is displayed on the bottom column in the menu.
Figure 5-16. Completing the Head ID input
Adjustment
Revision C
122