Epson Stylus COLOR 760 Service Manual page 102

EPSON Stylus COLOR 760
5) Remove the CR Encoder Board Assembly from the CR Frame as Figure
4-45.
CR Encoder Board Assy.
CR Assembly
Figure 4-45. Removing the CR Encoder Board Assy.
6) Remove the CR Timing Belt from the gutter on the CR Frame.
n
Make sure that the Torsion Spring 1.08 is hung on
the protrusion of the I/C Detector Lever and the
hook on the CR frame correctly. Refer to the Figure
4-46.
n
Make sure that the I/C Detector Cables are placed in
the gutters Figure 4-47.
n
Make sure that the I/C Detector Lever is moved
correctly.
Disassembly and Assembly
Hanging portion
Figure 4-46. Assembling the I/C Detector Lever
Figure 4-47. Placing the I/C Detector Cables
Disassembly Procedures
Torsion Spring 1.08
I/C Detector Lever
Hanging portion
Revision C
Torsion Spring
102