Epson Stylus COLOR 760 Service Manual page 145

EPSON Stylus COLOR 760
Table 6-2. Lubrication Point (continued)
No. Standard
<Lubrication Point>
"SHAFT, PULLEY, DRIVEN"
6
<Lubricant Type> G-26
<Lubrication Amount>
1 x 1mm
<Lubrication Point>
"ROLLER ASSEMBLY, EJECT"
7
<Lubricant Type> G-26
<Lubrication Amount>
1 x 1mm
<Lubrication Point>
3 points on the smaller gear of the
"COMBINATION GEAR 12, 28.8" (Ink
Unit).
8
<Lubricant Type> G-26
<Lubrication Amount>
1 x 1 mm (for each point)
<Lubrication Point>
Shaft on the "FRAME, MIDDLE" (Ink Unit)
<Lubricant Type> G-26
9
<Lubrication Amount>
1 x 1 mm
<Lubrication Point>
"SPUR GEAR, 27.2" (ASF Unit)
10
<Lubricant Type> G-26
<Lubrication Amount>
One 2 mm-diameter ball
Maintenance
Remarks / Reference Page
See Page 148.
See Page 148.
Apply grease over the tips of the
teeth.
See Page 148.
See Page 148.
• Apply grease thinly to the
shaded area as illustrated.
• Do not apply grease to the
hooks.
See Page 148.
Overview
Table 6-2. Lubrication Point (continued)
No. Standard
<Lubrication Point>
"SPUR GEAR, 23.2" (Gear Train)
11 <Lubricant Type> G-26
<Lubrication Amount>
1 mm x 1/3 round.
<Lubrication Point>
Groove of "ROLLER, PF"
12 <Lubricant Type> G-26
<Lubrication Amount>
1 x 5mm
<Lubrication Point>
Contact point between "ROLLER, EJECT"
and "GROUND SPRING, EJECT"
13
<Lubricant Type> G-26
<Lubrication Amount>
1 x 2mm
<Lubrication Point>
Area on the "ROLLER, PF" where the
bearing for "PAPER GUIDE, REAR"
comes in contact.
14
<Lubricant Type> G-26
<Lubrication Amount>
1 x 1/2 turn
<Lubrication Point>
"PAPER GUIDE, FRONT" (3 places)
<Lubricant Type> G-26
15
<Lubrication Amount>
1 x 2mm (Roller Eject side)
1 x 2mm (Roller Eject side)
1 x 10mm (Roller PF side)
Revision C
Remarks / Reference Page
Do not smear the "SCALE, PF"
with grease.
See Page 149.
See Page 149.
See Page 149.
Apply grease while rotating the
"Roller, PF Unit".
See Page 149.
See Page 150.
145