Epson Stylus COLOR 760 Service Manual page 104

EPSON Stylus COLOR 760
9) Remove three screws (No.1) securing the Front Frame to the Printer
mechanism and remove it. Refer to Figure 4-51.
10) Remove three screws (No.1) securing the Paper Eject Frame Assembly
and remove it. Refer to Figure 4-51.
No.1 Screws fixing
the Front Frame
Figure 4-51. Removing the Font Frame & Paper Eject Frame
11) Remove the PF Earth Spring between the left edge of the PF Roller and
the Bottom Frame.
12) Remove the Paper Guide Front by releasing the two hooks from the Paper
Eject Roller Shaft. Refer to Figure 4-52.
13) Remove the Earth Spring from the left edge of the Paper Eject Roller
Assembly.
14) Remove the Paper Eject Roller Assembly, releasing the fixed locks located
on the right and Left edges of the Paper Eject Roller Shaft.
Refer to Figure 4-53.
Disassembly and Assembly
No.1 Screws fixing the Paper
Eject Frame Assembly
Disassembly Procedures
Hooks fixing the Paper Guide
Front to the Paper Eject Roller
Paper Guide Front
Figure 4-52. Removing the Paper Guide Front
Hooks fixing the
Paper Eject Roller
Paper Eject Roller Assy
Figure 4-53. Removing the Paper Eject Roller Assembly
Revision C
104