Bin 3 - 5 Eject Roller Shaft Removal - Epson EPL-N2700 Service Manual

EPL-N2700 Optional Units

4.2.17.3 Bin 3 - 5 Eject Roller Shaft Removal

1. Remove the Front Cover and the Rear Cover. (Refer to Section
4.2.1 and Section 4.2.2.)
2. Remove the Bin4/Bin5 Switch Solenoid. (Refer to Section 4.2.7.)
3. Remove four screws (4025) securing the guide plate to the Unit
Frame and remove the guide plate. (Refer to Section 4.2.14.)
Bin 1- 5 Eject Roller Shaft Removal
5-Bin Unit
Figure 4-28.
Disassembly and Assembly of the 5-Bin Unit
4. Remove the retaining ring (9302) fixing the gear 20T to Eject Roller
Shaft and remove the gear. (See Figure 4-28.)
5. Remove four screws (3501) securing the guide plate located under
the Eject Roller Shaft to the Unit Frame and remove the guide plate.
(See Figure 4-28.)
6. Remove the retaining ring (9302) fixing the bushings for the Eject
Roller Shaft to the Unit Frame and remove the bushings. (See
Figure 4-28.)
7. Remove the Eject Roller Shaft.
Revision A
93