EPL-N2700 Optional Units
3.3 Maintenance of the LCC Unit
The maintenance method of the LCC Unit is mostly same as for the
printer body. Therefore, this section only describe the method specific
to the LCC Unit.
3.3.1 Maintenance Items
The LCC parts that require maintenance are as listed in the following
table.
Table 3-1. Maintenance Items
Maintenance Item
Operations required
Paper Take-up Roller 1
Cleaning / Replacement
Paper Take-up Roller 2
Cleaning / Replacement
Roller with a Torque Limiter Cleaning / Replacement
Feed Roller
Cleaning / Replacement
Separate Roller
Cleaning / Replacement
Torque Limiter Assembly
Replacement
Vertical Transport Roller
Cleaning / Replacement
Vertical Transport Roller
Cleaning / Replacement
(driven)
Do not use any solvent, including alcohol.
LCC Unit
3.3.2 Cleaning the Paper Take-up Roller
1. Remove the Paper Take-up Unit. (Refer to Section 3.2.3.)
2. Wipe the Paper Take-up Roller with a soft cloth moistened with
water.
Replacement Cycle
300,000 sheets
300,000 sheets
300,000 sheets
200,000 sheets
200,000 sheets
200,000 sheets
-
300,000 sheets
Maintenance of the LCC Unit
Figure 3-36. Cleaning the Paper Take-up Roller
Revision A
60