Shift Guide Plate Removal - Epson EPL-N2700 Service Manual

EPL-N2700 Optional Units

4.2.16 Shift Guide Plate Removal

1. Remove the Front Cover and the Rear Cover. (Refer to Section
4.2.1 and Section 4.2.2.)
2. Remove the Shift Motor along with the bracket. (Refer to Section
4.2.4.)
3. Remove the Transport Motor along with the bracket. (Refer to
Section 4.2.9.)
4. Remove the Transfer Switch Solenoid along with the bracket. (Refer
to Section 4.2.11.)
5. Remove the Bin 1 Guide, gear 24T, pin (0535), and the Eject
Sensor Board. (Refer to Section 4.2.15.)
6. Remove the screw (4005) and five screws (3501) securing the Shift
Guide Plate to the Unit Frame and remove the shift mechanism from
the 5-Bin Unit Frame.
7. Remove two shoulder screws securing the Shift Guide Plate to the
guide plate and two rolls. Then remove the Shift Guide Plate from
the guide plate.
8. Remove the screw (1318) securing the arm and shaft to the Shift
Guide Plate and remove the arm and the shaft.
5-Bin Unit Disassembly and Assembly of the 5-Bin Unit
Figure 4-27. Shift Guide Plate Removal
Revision A
91