Levelness Adjustment Of The 10-Bin Unit - Epson EPL-N2700 Service Manual

EPL-N2700 Optional Units

5.1.2 Levelness Adjustment of the 10-Bin Unit

1. Remove the covers from the both legs of the 10-Bin Unit.
Figure 5-21. Adjustment - 1
2. Loosen the 2 wing bolts.
Figure 5-22. Adjustment - 2
3. Turn the knob attached to each leg of the unit to adjust its standing
position.
10-Bin Unit
4. If the knob is turned counterclockwise, the 10-Bin Unit moves in the
direction shown in the figure below.
5. After the standing position has been adjusted, tighten the wing bolts.
6. Reinstall the covers onto the legs of the 10-Bin Unit.
Installing the 10-Bin Unit
Figure 5-23. Adjustment - 3
Revision A
113