Disassembly And Assembly Of The Double Cassette Unit; Paper Take-Up Roller Removal; Paper Empty Sensor Removal - Epson EPL-N2700 Service Manual

EPL-N2700 Optional Units

1.2 Disassembly and Assembly of the Double Cassette Unit

This section provides the disassembly procedure for the Double
Cassette Unit. Unless otherwise specified, assembly can be performed
by following the disassembly procedure in reverse order.

1.2.1 Paper Take-up Roller Removal

1. Release the lock on the Paper Take-up Roller and slide the roller
along the axle plate to remove the roller.
Figure 1-7. Paper Take-up Roller Removal
When installing the Paper Take-up Roller, ensure the
roller is securely locked as shown in the figure below.
Double Cassette Unit Disassembly and Assembly of the Double Cassette Unit
If you have replaced the Paper Take-up Roller, perform
"LC2 Counter Clear" in the maintenance menu. In case
2 Double Cassette Unit are connected, perform "LC3
Counter Clear" as well.

1.2.2 Paper Empty Sensor Removal

1. Release three hooks attaching the holder to the guide plate and
remove the holder. (See Figure 1-8.)
2. Remove the screw (3501) securing the paper empty sensor bracket
to the guide plate. (See Figure 1-8.)
3. Remove the stopper for the Paper Empty Sensor and remove the
sensor. (See Figure 1-8.)
4. Disconnect the harness from the Paper Empty Sensor.
Revision A
11