Timing Belt Removal - Epson EPL-N2700 Service Manual

EPL-N2700 Optional Units

3.2.5.2 Timing Belt Removal

1. Pull out the paper cassette and remove the Paper Tray Unit. (Refer
to Section 3.2.3.)
2. Remove three shoulder screws securing the Front Cover to the
Paper Tray Unit.
3. Remove the E-Ring (9111) fixing the cam shaft to the bracket.
4. Remove three screws (3305) securing the bracket to the Paper Tray
Unit, then remove the pulley (32T) and the bracket along with the
timing belt.
Figure 3-33. Front Cover Removal
LCC Unit
5. Release the hook securing the ground plate for the lifter drive shaft
to the pulley (20T) and remove the ground plate from the pulley.
6. Disengage the end of the timing belt from the pulley (20T).
7. Remove the E-Ring (9151) fixing the shaft for the pulley (32T) to the
bracket.
8. Sliding the pulley (32T) toward the bracket to remove the pin (0531)
and remove the pulley (32T) and the torsion spring from the shaft.
9. Remove the timing belt from the pulley (32T).
Disassembly and Assembly of the LCC Unit
Figure 3-34. Timing Belt Removal
Revision A
57