Rear Cover Removal - Epson EPL-5700 Service Manual

EPL-5700

4.2.15 Rear Cover Removal

1. Remove the right cover. (See section 4.2.2)
2. Remove the paper empty sensor.(See section 4.2.4)
3. Remove the control panel. (See section 4.2.6)
4. Remove the front cover.(See section 4.2.7)
5. Remove the left cover.(See section 4.2.10)
6. Remove the top cover. (See section 4.2.14)
7. Remove two CBB screws(3x8), three CS screws(3x6) and one CP screw
with out-teethed washer securing the rear cover to the printer.
8. Lift up the rear cover once and remove it.
Rev. A
Rear Cover
CS(3x5)
CBB(3x8)
CS(3x5)
CS(3x5)
Out teeth washer
CP(3x6)
Figure 4-22. Rear Cover Removal
Chapter4 Disassembly and Assembly
4-17