Paper Feed Roller Unit Removal - Epson EPL-5700 Service Manual

EPL-5700

4.2.12 Paper Feed Roller Unit Removal

1. Remove the right cover. (See section 4.2.2)
2. Remove the paper empty sensor.(See section 4.2.4)
3. Remove the control panel. (See section 4.2.6)
4. Remove the front cover.(See section 4.2.7)
5. Remove the left cover. (See section 4.2.10)
6. Remove two CS screws(3x6) securing the manual feed guide to the
frame of the printer, and remove the manual feed guide.
Paper Feed
Guide Holder at
left side
CSB(3x8)
CS(3x6)
Left Paper Feed
Guide Holder
CSB(3x8)
Paper Feed Guide
Figure 4-18. Paper Feed Guide Removal
Rev. A
Paper Feed Guide
Manual Feed Guide
CS(3x6)
7. Remove one CSB screws(3x8) securing the left paper feed guide holder
to the left frame of the printer.
8. Remove one CSB screw(3x8) securing the paper feed guide holder and
paper feed guide.
9. Release the connection between the paper guide and holder, pushing
down the left paper guide holder, and remove the paper guide.
10. Locate the printer's back side bottom so that printer's bottom side comes
side. Remove two CSB screws (3x8), one CS screw (3x6) and one fixing
screw , securing the paper feed unit to the frame of the printer.
CSB(3x8)
Left Frame
Fixing Screw
B
Left Frame
Paper Feed Unit
Figure 4-19. Paper Feed Unit Removal
11. Pull the right side of the paper feed unit toward yourself(1), and remove
it, moving the whole unit to right side.(2) (See "A" in figure4-19)
Chapter4 Disassembly and Assembly
CS(3x6)
Paper Feed Unit
Harness of Paper Feed Solenoid
A
How to remove the paper feed
unit
CSB(3x8)
4-14