Interlock Switch Removal - Epson EPL-5700 Service Manual

EPL-5700

4.2.8 Interlock Switch Removal

1. Remove the right cover.(See section 4.2.2)
2. Remove the control panel. (See section 4.2.6)
3. Remove the front cover. (See section 4.2.7)
4. Remove the harness of the inter lock switch from the switch.
5. Remove one CS screw(3x5) securing inter lock switch bracket to the
printer.
6. Remove two CP(O) screws securing the inter lock switch to the bracket,
and remove the inter lock switch.
Interlock Switch
CP(O) (2x10)
Figure 4-13. Interlock Switch Removal
In case of removing the inter lock switch, make
sure to perform interlock switch positioning
adjustment when assembling. (Refer to Chapter5)
Rev. A
Interlock Switch
Bracket
CS(3x6)
Interlock Switch
Harness
Chapter4 Disassembly and Assembly
4-10