Stylus Pro XL
3.2.5.9 Paper Feed Roller Assembly Removal
1.
Remove the printer mechanism (see Section 3.2.4).
2.
Remove the carriage unit (see Section 3.2.5.2).
3.
Remove the pump unit (see Section 3.2.5.3).
4.
Remove the tension spring holding the tension roller assembly to the sub frame.
5.
Remove the tension wire on the left side frame holding the tension roller assembly to the left
side frame.
6.
Remove a CBB (M3 8) screw securing the tension roller assembly to the sub frame and remove
the tension roller assembly.
Tension
Wi re
Tension Rol ler
Assembly
Figure 3-19. Tension Roller Assembly Removal
7.
Release the 2 bushings securing the paper feed roller assembly to both the left side frame and
the sub frame. Then remove the paper feed roller assembly.
Figure 3-20. Paper Feed Roller Assembly Removal
REV.-A
Eject Paper
Roller
Paper Feed Roller
Disassembly and Assmbly
Tension
Wi re
C BB (M3x8)
3-17