4.2 Changing parameter values
4.2.1
Numerical values
4.2.1
Parameter selection
Numerical values can be altered in the following ways:
With the arrow keys ñ and ò choose the line in which the value
–
needs to be changed.
–
Press the OK key.
The curser blinks under the position of the value to be changed.
With the arrow keys ï and ð change between the values.
–
With the arrow keys ñ and ò increase or decrease the chosen
–
value.
With parameters that can not be arbitrarily changed, by pressing of
the arrow keys ñ and ò another possible parameter is shown on
the display.
–
Press the OK key.
The set value will be accepted.
–
If the set value is not to be accepted, press the ESC-key.
The original value or setting will be reestablished.
With some parameters several choices are available.
The parameter can be changed in the following way:
With the arrow keys ñ and ò choose the line with the parameter to
–
is be changed.
–
Press the OK key.
With the arrow keys ñ and ò change between the possibilities. The
–
respective parameter is shown.
–
Press the OK key. The set value or parameter will be accepted.
–
If the set value or parameter is not to be accepted, press the
ESC-key.
The original value or parameter setting will be reestablished.
1
19