Programming Menu "Bartack - Duerkopp Adler 540-100-1 Operating Instructions Manual

5.7.2

Programming menu "Bartack"

Select programming menu "Bartack"
–
Press the P-key.
–
Select line "upper tack" or "lower tack" with the arrow
keys ñ and ò.
–
Press the OK-key.
Select the desired parameter with the arrow keys ñ and ò.
–
–
Press the OK-key.
–
The cursor blinks under a digit of the value.
Change between digits with the arrow keys ï and ð.
–
–
Increase or decrease the selected value with the arrow
keys ñ and ò.
–
Press the OK-key to confirm.
–
Press the ESC-key.
According to the selected bartack type the following parameters can be
changed for the bartack section.
1
33