Changing Fullness Values - Duerkopp Adler 550-16-23 Operating Instructions Manual

5.2.2

Changing Fullness Values

22
For the adaption to differing types of material with the program step,
the fullness values can be changed via the "0" to "15" keys at any time.
Via the supplementary foot switch (see Chapter 6.16), the current
fullness value can be increased or decreased by 0.5.
Increasing or decreasing a fullness value by a whole value:
Example: Set fullness value = 08
–
Press the "9" key.
The next higher fullness value is selected.
–
Press the "7" key.
The next lower fullness value is selected.
The changed fullness value is automatically deleted through selection
of the next program step.
Increasing or decreasing a fullness value by a half value:
Example: Set fullness value = 08
–
Step forward on the foot pedal.
The fullness value is increased by 0.5.
–
Step back on the foot pedal.
The fullness value is decreased by 0.5.
The changed fullness value is automatically deleted through selection
of the next program step.