8.3
Altering numerical values, parameter values, selection of alternatives
8.3.1
Altering numerical values
–
Select the desired line with the keys "ñ " or "ò ".
–
Press the "OK " key.
The selected numerical value is marked by a flashing cursor.
–
Change between the points with the keys "ï" or "ð ".
Increase or reduce the value of the selected point by one with the
keys "ñ " or "ò ".
–
Press the "OK " key.
The currently set value is taken over.
or
–
Press the "ESC" key.
The original value is maintained.
Note
All values can only be altered within the minimum and maximum
values.
1
21