Table of Contents
Advertisement
64
5.4.2
Setting the Speed parameter (Max. Speed)
It is possible to reduce the maximum speed at this point. The value
of the maximum speed can be set in the software at technician
level.
Menu item
(Max. Speed)
Speed
5.4.3
Setting the Thread cutter parameter
(Thread Trim)
Set whether the thread cutter is activated or deactivated at the
end of the seam.
Menu item
(Thread Trim)
Thread cutter
5.4.4
Setting the Thread clamp parameter
(Thread Clamp)
If a thread clamp is present, this function can be activated or
deactivated here. The thread clamp is closed for the 1
the seam to ensure that the needle thread lies on the underside
of the sewing material.
Menu item
(Thread Clamp)
Thread clamp
Operating Instructions 867-M PREMIUM - 02.0 - 05/2017
Setting option
0050 – 3800 [rpm]
depending on subclass
Setting option
ON = on
OFF = off
Setting option
ON = on
OFF = off
Programming
st
stitch of
Advertisement
Table of Contents
