Duerkopp Adler 506-3 Installation Instructions Manual
Hide thumbs
Also See for 506-3:
- Operating instructions manual (24 pages) ,
- Service instructions manual (52 pages) ,
- Parts list (78 pages)
Table of Contents
Advertisement
Quick Links
Postfach 17 03 51, D-33703 Bielefeld • Potsdamer Straße 190, D-33719 Bielefeld
Telefon +49 (0) 521 / 9 25-00 • Telefax +49 (0) 521 / 9 25 24 35 • www.duerkopp-adler.com
Ausgabe / Edition:
Änderungsindex
10/2008
Rev. index: 01.0
Instructions, complete
Operating Instructions
Installation Instructions
Service Instructions
Printed in Federal Republic of Germany
506-3
Teile-Nr./Part.-No.:
0791 506011
1
2
3
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Duerkopp Adler 506-3
Summary of Contents for Duerkopp Adler 506-3
-
Page 1: Operating Instructions
506-3 Instructions, complete Operating Instructions Installation Instructions Service Instructions Postfach 17 03 51, D-33703 Bielefeld • Potsdamer Straße 190, D-33719 Bielefeld Telefon +49 (0) 521 / 9 25-00 • Telefax +49 (0) 521 / 9 25 24 35 • www.duerkopp-adler.com Ausgabe / Edition: Änderungsindex Teile-Nr./Part.-No.:... - Page 2 Instructions, complete 506-3 Overview Operating table Operating Instructions Installation Instructions Service Instructions Pneumatic circuit plan 9770 506002 Interconnection-diagram 9890 506003 B All rights reserved. Property of Dürkopp Adler AG and copyrighted. Reproduction or publication of the content in any manner, even in extracts, without prior written permission of Dürkopp Adler AG, is prohibited.
- Page 3 Foreword This instruction manual is intended to help the user to become familiar with the machine and take advantage of its application possibilities in accordance with the recommendations. The instruction manual contains important information on how to operate the machine securely, properly and economically. Observation of the instructions eliminates danger, reduces costs for repair and down-times, and increases the reliability and life of the machine.
-
Page 4: General Safety Instructions
General safety instructions The non-observance of the following safety instructions can cause bodily injuries or damages to the machine. 1. The machine must only be commissioned in full knowledge of the instruction book and operated by persons with appropriate training. 2. -
Page 5: Table Of Contents
Contents Page: Part 2: Installation Instructions Cl. 506-3 Scope of Delivery ..........Installation of the Unit Transport . -
Page 7: Scope Of Delivery
1. Scope of Delivery – Frame with sewing drive and table 1100 x 736 mm – Sewing machine with integrated bobbin winder – Quick control unit – Compressed air maintenance unit – Yarn stand – Foot switches – Sewing light –... -
Page 8: Attaching The Yarn Stand
– Loosen the locking screws 1 on both sides of the frame. – Set the base plate horizontally at the desired work height. In order to avoid a tilt pull out or push in the base plate uniformly on both sides. –... -
Page 9: Electrical Connection
3. Electrical Connection ATTENTION ! All work on the electrical components of the sewing unit may be carried out only by electricians or appropriately trained personnel. The mains plug must be pulled. The instruction manual of the drive’s manufacturer must imperatively be respected! 3.1 Connecting the Control Unit –... -
Page 10: Pneumatic Connection
4. Pneumatic Connection For the operation of the clamp lifting, thread tension opening, needle cooling, etc. the unit must be supplied with water-free compressed air. ATTENTION ! For a flawless functioning of the pneumatic control processes the compressed air supply must be laid out as follows: Even at the instant of greatest air consumption the minimum operating pressure may not fall below 5 bar. -
Page 11: Oil Supply
5. Oil supply Filling the oil reservoir for shuttle-track lubrication Only DA-10 lubricating oil may be used to fill the oil reservoir. DA-10 is available from DÜRKOPP ADLER AG retail outlets. – Unscrew oil-filler cap 1. Fill the oil reservoir 2 with DA-10 lubricating oil to the upper edge of –... - Page 12 Notes:...
Need help?
Do you have a question about the 506-3 and is the answer not in the manual?
Questions and answers