Center Forward Slide - Duerkopp Adler 975-1-5 Service Instructions Manual

4.11 Center Forward Slide

1
2
The center forward slide 1 folds the trim around the interior slide and
the inner forward slide above it.
The trim fold created during folding should be in the recess in the
center forward slide. This is necessary for the folded trim to be held
while the inner forward slide runs back into the initial position.
Caution Risk of Injury !
Turn the main switch off.
Set center forward slide only with the sewing unit turned off.
Conduct a function test with the greatest possible caution.
Setting the position
–
Loosen screws 2.
–
Align the center forward slide.
–
Tighten screws 2 again.
Conduct a function test
–
Set the program switch to 41 and press the " STOP " key.
With the " REPEAT " key run through the function sequence in
interval operation.
49