Pressure Foot; Pressure Foot Pressure - Duerkopp Adler 975-1-5 Service Instructions Manual

2.5 Pressure Foot

2.5.1 Pressure Foot Pressure

1
In the cross seam the opened beard clamp can no longer clamp the
material. In order to avoid missing stitches the pressure foot is lowered.
The lowering of the pressure foot occurs at the same time as the
opening of the beard clamp.
The pressure foot should follow the triggering mechanism during the
downward movement.
Too low pressure foot pressure can lead to missing stitches.
Caution Risk of Injury !
Turn the main switch off.
Adjust pressure foot pressure only with the sewing unit turned off.
–
Set the pressure foot pressure with screw 1.
13