Clamping Table; Large Guide Curve - Duerkopp Adler 975-1-5 Service Instructions Manual

4.

Clamping Table

4.1 Large Guide Curve

30
1
During the automatic operation the aluminium strips trigger the
functions listed in the table via the initiators.
Pos. Function
1 Starting the sewing cycle
after a set time.
2 Slow sewing
3 Opening the beard clamp
Lower the pressure foot
4 Stop the sewing cycle
5 Bring the folding device
into the "removal position"
6 Stopping the clamping
table in the initial position
Effect of an incorrect
activation point
- Thread breakage through
sewing in place.
- Lowered sewing head
collides with the clamp.
- Maximum sewing length
not possible.
- Time loss
- Unequal seam interval
- Unequal seam interval.
- Seam run not squared off.
- Beard clamp collides
with the pressure foot.
- " Tearing " of the cloth.
- Missing stitches.
- Bartacking too short.
- Bartacking too long.
- Insignificant
- Insignificant