Duerkopp Adler 975-1-5 Service Instructions Manual page 51

1
2
3
Setting the height
During the folding sequence the swing clamp presses the interior slide
upward against the retracted inner forward slide at half pressure. The
height of the inner forward slide also determines the height of the
swing clamp and of the interior slide.
–
Turn the setting wheel 2 into position 1.
–
Bend the inner forward slide.
Speed of the forward slide forward and back
–
Set the program switch to 41 and press the " STOP " key.
With the " REPEAT " key run through the function sequence in
interval operation.
–
Observe the movement of the inner forward slide.
The slide should move quickly but not jerk.
–
Set the movement with the throttle.
51