Reference Position - Duerkopp Adler 510 Operating/Service Instructions Manual

6.2 Reference position

4 3 2 1
Caution: Danger of injury!
Switch off main switch.
Check and adjust reference position with utmost caution when
the automatic bartacker is switched on.
Standard checking
The movement of the clamping arm 2 and the rest plate 4 is effected by
two step motors.
The feed plate 5 carries the clamping arm and the rest plate.
–
Press function key "F" when the main menu is displayed.
–
Enter code number "25483".
The display changes over to the technician mode.
–
Activate the menu "Machine/Parameter" with the key "OK".
Referenz.:
–
Select parameter "Loading position".
–
Select function "B = Machine zero position".
–
Press "OK" key.
The automatic bartacker positions in the machine zero position.
–
Switch off main switch.
–
Unscrew screws 1 and 3.
–
Take off clamping arm 2 and rest plate 4.
5
cut.rpm
max.rpm
stop pos.
sew.st.pt.
1 ref.freq.
3
35