Thread Guiding Sheet - Duerkopp Adler 510 Operating/Service Instructions Manual

5.4 Thread guiding sheet

32
1 3 2
Caution: Danger of injury!
Switch off main switch.
Check and adjust thread guiding sheet only when the automatic
bartacker is switched off.
Standard checking
The needle 3 should stand in the center of the cutout of thread
guiding sheet 2.
–
Check position of the thread guiding sheet
Correction
–
Loosen screws 1.
–
Align thread guiding sheet as to the needle.
–
Tighten screws 1.
1