2.9.2
Adjust reference position
14
The adjustment of the correct reference position of the sewing motor is
done with the help of the adjusting aid in the control.
Call up adjusting aid
The adjusting aid shows the correct position of crank 1.
–
Switch on main switch.
The control is initialized.
The main menu appears.
–
Press function key "F" when the main menu is displayed.
–
Enter code number "25483".
–
Press key "OK".
After entry of the correct code number the display changes over to
the menu "Technician mode".
Maschine
Benutzer
Service
Freie Konturen
Memory-Dongle
1
machine config
user settings
service
free contours
memory dongle