Fn = 3: Function 3 Setting Memory Switch Value - Citizen PPU-700 Command Reference Manual

fn = 3: Function 3 Setting Memory Switch Value

GS ( E pL pH fn
[Code] <1D>H<28>H<45>H<pL><pH><fn>[a1 b18...b11] ... [ak bk8...bk1]
[Range] 10≦（pL＋pH×256）≦65535
ｆｎ＝3
a＝1、2、3、4
b＝48、49、50
[Outline] • Changes the memory switch set in "a" to the value set in "b".
• Setting memory switch 1 (a = 1)
[a1 b18...b11] ... [ak bk8...bk1]
b
48 Sets corresponding bit to OFF.
49 Sets corresponding bit to ON.
50 Does not change corresponding bit.
Bit b (Set Value)
48 (Default)）
1
49
48 (Default)）
2
49
48 (Default)
3
49
48 (Default)
4
49
48 (Default)
5
49
6 48 (Default)
48 (Default)
7
49
48 (Default)
8
49
Function
Reports the power on.
Does not report power on.
Sets input buffer capacity to 4K bytes.
Sets input buffer capacity to 45 bytes.
Sets input buffer full and offline to be Busy.
Sets to be busy with input buffer full.
At the occurrence of receiving error, replaces the data
with "?".
At the occurrence of receiving error, ignores the data.
Disables CR (0DH).
Enables CR (0DH).
Reserved
Does not reset at serial I/F pin 6.
Resets at serial I/F pin 6.
Does not reset at serial I/F pin 25.
Resets sat serial I/F pin 25.
- 94 -
Function