Esc & S N M [A [P] S×A] M-N+1 - Citizen PPU-700 Command Reference Manual

ESC & s n m [a [p] s×a] m-n+1
[Function] Defining the download characters
[Code]
<1B>H<26>H<s>H<n>H<m>H［<a>H<p1>H<p2>...<ps×a>］ｍ－ｎ＋1
[Range] ｓ＝3(FontＡ, B) ｓ＝2(FontC)
32≦ｎ≦ｍ≦126
0≦ａ≦12（FontA）、0≦ａ≦9 （FontB）、0≦ａ≦8 （FontC）
0≦p1...ps×ａ≦255
[Outline] Defines the font of download characters of alphanumeric characters.
• "s" indicates the number of bytes in vertical direction. "n" indicates the start character
code and "m" the end character code. To define only one character, set n = m.
Character codes definable includes 95 ASCII codes in total in the range of <20>H to
<7E>H.
• "a" indicates the number of dots to be defined in horizontal direction. "p" is the data
to be defined, which indicate a pattern equal to "a" dots in horizontal direction from
the left end. The rest of the pattern on the right side is filled with space.
• The number of data to be defined is "s  a ". Download characters thus defined
valid until redefinition, execution of ESC @, GS *, FS q, GS ( A, deletion by ESC ?, or
power OFF is performed.
[Caution] Download characters and download bit images cannot be defined simultaneously.
Running this command clears the definition of the download bit image.
[Default] Same as the internal character set.
[See Also] ESC
[Example]
p1
p2
24dot
p3
FontA
Create each data bit by setting "1" for a printed dot and "0" for an unprinted dot.
[Sample Program]
Refer to Sample Program and Print Results for ESC %.
%, ESC ?
12dot
p4
p34
p5 p35
p6 p36
・
MSB
LSB
- 22 -
remain