Dle Dc4 Fn M T （Specification Of Fn = 8 - Citizen PPU-700 Command Reference Manual

DLE DC4 fn m t （Specification of fn = 8）
[Function] Buffer clear
[Code]
<10>H<14>H<fn><d1>...<d7>
[Range]
ｆｎ＝8、d1＝1、d2＝3、d3＝20、d4＝1、d5＝6、d6＝2、d7＝8
[Outline] • Erases all data in receiving buffer or print buffer.
• Sends the following 3-byte data group.
• Enters the state of selecting STANDARD MODE.
[Caution] • When receiving a code row coinciding with the code configuring this command, the
same operation as this command takes place and attention by the user is required.
• This command must not be used between other command code rows.
• This command is ignored during transmission of block data.
Header
Identifier
NUL
Example: When corresponding code row is present in bit image data.
Example: This command is used in bit image data.
Hex.
37H
25H
00H
- 127 -
Decimal No. of Data
55
37
0
1 byte
1 byte
1 byte