Esc A N - Citizen PPU-700 Command Reference Manual

ESC a n

[Function] Aligning the characters
[Code]
<1B>H<61>H<n>
[Range] 0≦ｎ≦2、48≦ｎ≦50
[Outline] All the printed data within one line are aligned in the specified position.
Depending on the value "n", positional alignment is carried out as shown in the table
below:
[Caution] • This command is valid only when it is inputted at the beginning of a line.
• This command does not affect the PAGE MODE.
• Executes justification in the print area being set.
[Default]
ｎ＝0
[Sample Program]
LPRINT CHR$(&H1B);"a"; CHR$(0);
LPRINT "AAAAA"; CHR$(&HA);
LPRINT CHR$(&H1B);"a"; CHR$(1);
LPRINT "AAAAA"; CHR$(&HA);
LPRINT CHR$(&H1B);"a"; CHR$(2);
LPRINT "AAAAA"; CHR$(&HA);
[Print Results]
AAAAA
Left-justified
n Position
0,48 Left end alignment
1,49 Centering
2,50 Right end alignment
AAAAA
Centered
AAAAA
Right-justified
- 41 -
Paper feed direction