Bit Image Commands; Esc * M N1 N2 [D]K - Citizen PPU-700 Command Reference Manual

2.2.5 Bit Image Commands

ESC * m n1 n2 [d]k

[Function] Specifying the bit image mode
[Code] <1B>H<2A>H<m>H<n1><n2>[<d>] k
[Range] m＝0, 1, 32, 33
0≦n1≦255
0≦n2≦2
0≦d≦255
ｋ＝n1＋256×n2（m＝0, 1）
ｋ＝（n1＋256×n2）×3（m＝32, 33）
[Outline] • According to the number of dots specified in "n1", "n2", specify the bit image of mode
• The number of dots printed is divided by 256, whose quotient is taken as "n2" and
• When bit image data have been input in excess of dot positions that can be printed on
•"d" is bit image data. Bits to be printed are specified as "1" and those not as "0".
• The bit image modes specified by "m" are shown as follows:
m
0 8-dots single density
1 8-dots double density
32 24-dots single density
33 24-dots double density
[Caution] • When the value of "m" is out of the above range, the data following after "n1" is
• After completion of bit image printing, the printer returns to normal data processing
"m".
residual as "n1". The total number of dots printed in the horizontal direction is equal
to "n1 + (256  n 2)".
・
one line, the excess data are discarded.
Mode No.
processed as normal printing data.
mode.
Vertical Direction
Dot No. Density of Dots
8 67DPI
8 67DPI
24 203DPI
24 203DPI
- 50 -
Horizontal Direction
Density of Dots Dot Max.
101DPI
203DPI
101DPI
203DPI
288
576
288
576