Fn = 66: Function 66 Executing Paper Feeding To Cut Position; Fn = 67: Function 67 Executing Paper Feeding To Initial Position - Citizen PPU-700 Command Reference Manual

fn = 66: Function 66 Executing Paper Feeding to Cut Position

FS ( L pL pH fn m
[Code]
<1C>H<28>H<4C>H<pL><pH><fn><m>
[Range]
（pL＋pH×256）＝2 （pL＝2、pH＝0）
ｆｎ＝66
ｍ＝48、49
[Outline] Executing paper feeding to the cut position.

fn = 67: Function 67 Executing Paper Feeding to Initial Position

FS ( L pL pH fn m
[Code]
<1C>H<28>H<4C>H<pL><pH><fn><m>
[Range]
（pL＋pH×256）＝2 （pL＝2、pH＝0）
fn＝67
m＝48、49
[Outline] Executing paper feeding to initial position.
m
Executes paper feeding to the next cut position. When, however, the
48 printer has already been standby at the cut position, no operation is
executed.
Executes paper feeding to the next cut position. When, however, the
49 printer has already been standby at the cut position, paper feeding to the
next cut position is executed.
m
Executes paper feeding to the next initial position. When, however, the
48 printer has already been standby at the initial position, no operation is
executed.
Executes paper feeding to the next initial position. When, however, the
49 printer has already been standby at the initial position, paper feeding
to the next initial position is executed.
Operation
Operation
- 125 -