Gs B N - Citizen PPU-700 Command Reference Manual

GS B n

[Function] Specifying/canceling the black/white inverted printing
[Code]
<1D>H<42>H<n>
[Range] 0≦ｎ≦255
[Outline] This command specifies or cancels the black/white inverted printing.
• "n" is valid only for the lowest bit (n0).
• Control by the lowest bit (n0) is shown as follows:
[Caution] • The black/white inversion works on internal and downloaded characters.
• The black/white inversion works also on the right spacing of characters defined by ESC
SP.
• This command does not affect the bit image, downloaded bit image, bar code, HRI
characters, or the skip area specified by HT, ESC $, or ESC ＼.
• This command does not affect the space between lines.
• Black/white inversion specification takes precedence over underline specification.
Underline printing specified is, therefore, nullified if black/white inversion is specified;
the underline setting, however, remains unchanged.
[Default]
ｎ＝0
n0
0 The black/white inverted printing is canceled.
1 The black/white inverted printing is specified.
Function
- 32 -